Install a new laundry room garbage disposal splash guard

Step-by-step written guide

1. Shut off the water or power source connected to the fixture and protect the cabinet or floor with towels.
2. Inspect the visible parts first so you can identify the failed seal, clog, valve, cartridge, hose, or mounting point.
3. Disassemble slowly and place small parts in order; photos help when reassembling washers, clips, and fittings.
4. Install the replacement part or clear the blockage, tightening only enough to seal without cracking plastic or porcelain.
5. Turn service back on gradually, test under normal use, and watch for leaks for several minutes before closing up.

Videos for this repair